These neodymium magnets are completely covered with a rubber layer providing the following benefits: water resistance and protection against scratching.
Material passing from the conveyor to the magnetic drum and, further, between both of the drums, the material becomes aerated that helps metal separation from adhesive materials.
Magnetic separators - magnetic filters
The magnetic separator serves to catching of metal magnetic impurities within a stream of liquid agents. It is equipped with very strong permanent magnets so there is no risk of tearing off magnetic impurities by the liquid stream. During the cleaning, you do not have to remove magnetic cores from the stainless-steel non-magnetic cases so no pollution and/or damaging is taking place.
The magnetic separator serves to catching of metal magnetic impurities within a stream of liquid agents. It is equipped with very strong permanent magnets so there is no risk of tearing off magnetic impurities by the liquid stream. Cleaning process is fully automated so there is no need for a human operation. This means the highest possible separation quality!
The magnetic separator serves to catching of metal magnetic impurities within a stream of bulk materials with good bulk characteristics. It is equipped with very strong permanent magnets based on rare earths, capable of reaching several times higher magnetic induction (magnetic force) in comparison with ferrite magnets. Main part of the magnetic separator is represented by magnetic sliding grates. We are reaching the magnetic induction value of up to 14,000 Gs!
The magnetic separator serves to catching of metal magnetic impurities within a stream of bulk materials with good bulk parameters. Cleaning process is fully automated so there is no need for a human operation. This means the highest possible separation quality!
Rotational separators are designed for a separation of impurities from hardly permeable mixtures characterized by compromised bulk parameters and coarser material granularity. The component including magnetic pipes is installed on a shaft driven by an electromotor. During the separation, magnetic pipes are continuously rotating. It is, therefore, possible to change the rotation speed based on the separated material type and quantity.
Plate separators are designed for the separation of impurities from easily permeable mixtures with not good bulk parameters and a coarser material granularity. This kind of material would not pass through a magnetic grate fluently. Usually they are equipped with ferrite magnets. Their advantage consists in an adjustable roof to be pulled apart; the roof is routing material flow directly onto magnetic plates. Available also in the automatic version!
Magnetic testing rods serve to the analysis whether the material contains metal-magnetic impurities. They are equipped with very strong rare-earth magnets. Impurities may be removed by pulling the plastics handle; this way they fall off.
Magnetic plate to be situated above a conveyor serves to a separation of small quantities of metal magnetic impurities from easily permeable mixtures transported on conveyor belts. To keep its full functioning, the plate must be cleaned every day.
Magnetic separator to be used for metals serves especially to a separation of bigger metal magnetic impurities from easily permeable mixtures transported on conveyor belts. We manufacture this product in the versions both with the manual and automatic cleaning.
Magnetic drums are designed for the separation of metal, magnetic impurities from bulk mixtures (color metals, plastics granulated material, waste mixtures, coal). Magnetic drum benefit consists in the fact that it is not a part of the belt conveyor so its utilization is more universal.
Up-taking magnetic drum is designed for a separation of metal magnetic impurities from bulk, adhesive mixtures transported on conveyors. Up-taking magnetic drum benefit consists in a double aeration of the separated material.
Magnetic rollers are designed for the separation of metal, magnetic impurities from bulk mixtures. Magnetic cylinders will replace existing end cylinder of the conveyor. It is suitable to be used also on places where downstream devices should be protected against damaging by metal particles.
Magnetic rods are equipped with very strong rare-earth magnets. Due to the very thin wall of the covering pipe, resulting magnetic force on the magnetic pipe surface is 6,300 and 8,900 Gs! Using these magnetic rods you can make any magnetic separator by yourself!
Magnets to be installed into injection molding machine hoppers find their application especially in the plastics processing industry, in case that recycled or crushed materials are used. These magnets are capable of catching even very small metal dust particles. Easy cleaning!
These separators belong to a new generation of magnetic separators. They enable also the separation of non-magnetic and magnetic metals, as well as the separation of other non-metallic particles.
We are also dealing with the development, designing and construction of separation lines. According to customer needs, we design a made-to-measure separation line fulfilling all requirements.