Flexible retrieving magnet
Flexible magnets are designed for catching and pulling of the metal objects from otherwise hardly accessible areas or secluded places, e. g. behind furniture, from pipelines, etc.
Bend the rod with a magnet to obtain various shapes – you will even get to inaccessible areas.
Magnet parameters
- The magnet is capable of holding objects with the weight of up to 900 g.
- Magnetic head has a diameter of 7 mm
- Flexible rod length is 490 mm
Flexible retrieving pull-out magnet
The magnet consists of two parts of the firm pipe and telescopic malleable rod. Pull the rod into needed length and tighten the end piece. Then you may bend the rod to get a desired shape. In the end of the rod, strong neodymium magnet is situated.
Magnet parameters
- The magnet is capable of holding objects with the weight of up to 1 300 g.
- Magnetic head has a diameter of 10 mm
- Total magnet reach is 930 mm
- The length in the inserted state is 520 mm
Flexible retrieving magnet for cars
Main benefit of this magnet consists in a sliding tip with a magnet. This way the tool may move between metal objects without a risk of being caught by surrounding metal objects. After spring located in the handle is pushed, the magnet slides out and required metal object becomes caught by it. The rod with the magnet may be bent in various directions.
Magnet parameters
- The magnet is capable of holding objects with the weight of up to 900 g
- Total magnet reach is 570 mm
Other manipulation aids that may facilitate your work
The magnetic square will save a lot of time when welding various profiles. You can use it when welding material in right angles, 45° or on a plane. Our magnetic square can be used on coated welding with shielded welding or flame welding. Methods of using Its advantage consists in easy handling. It is also […]
The device is instrumental towards simplifying of working with metal sheets. Using the manipulator, the sheets may be simply moved, turned and/or otherwise handled. Great advantage consists in the posibility of de-magnetizing. By drawing up of de-magnetizing lever to the manual sheet manipulator body, sufficiently big air gap originates between the manipulator and metal sheet. Due […]
Manual magnetic collectors are used to collect metal impurities (shavings, nails, screws, wires). Due to easy manipulation, they are frequently helping in metal-working and locksmith workshops. An easy de-magnetizing – by pulling the handrail in upper collector part, de-magnetizing takes place so caught metals can fall off easily. Benefits High efficiency Easy handling and de-magnetizing […]
Magnetic handling rod MMT 20 x 6 This type of rods can be used not only for sheet handling. It will make sheet loading in and unloading from presses easier and quicker. It will result in reduction of risk of hand injury caused with sheet. Magnetic handling rods also eliminate hand inserting under the press head. This […]
Hand magnet makes metal sheet handling easier considerably. It has a wide scope of applications above all in the metal processing industry. Hand magnets are to be fixed to open hand straps. Magnetic force is balanced precisely (the handled sheet is held well during handling, however, it can be released easily by mere movement of fingers). […]
Wherever magnetically conductive metal sheets are manipulated, separator of metal sheets can be employed. Making use of the permeability phenomenon, this device makes the metal sheets loose from one another without problems, thus enabling the operator to remove these sheets individually when feeding them into presses, power sheers, or when processing in any other way. […]
Magnets on bars are finding their application in particular in plating and painting shops. They are frequently used for pulling components out of tank or out of any other hardly accessible place. Magnet on bar is an excellent helper for such activities in plating and painting shops. Magnet on bar is fitted with anisotropic […]
BUY AN RETRIEVING MAGNET IN OUR E-SHOP - U. S. CUSTOMER