E. g. the following items may be attached to your wrist: screws, nuts, full twists, nails, drills, spanners and. small tools.
These neodymium magnets are completely covered with a rubber layer providing the following benefits: water resistance and protection against scratching.
Material passing from the conveyor to the magnetic drum and, further, between both of the drums, the material becomes aerated that helps metal separation from adhesive materials.
What magnets are best bought for using in households or offices?
Black ferrite magnets because they are the cheapest ones
Color magnets because they are cheap and nice
Conical magnets because they are stronger and more practical
Magnets in steel casings as they are strong and ease to handle
Magnets in plastics casings as they are the strongest ones
Votes in total: 4384
Newly in our e-shop, you will find selected types of magnetic separators. These are, for example, finger magnets (magnetic grates) and small spreading (drawing apart) roofs. The roofs guarantee better material flow distribution, if compared with situations characteristic for independent grates. They are cheaper than other grates for making full-value labyrinths.
Magnetic foils- we offer the thickness 0,4 - 2 mm. Brown and white colours ad with the self-sticking layer from one side. Magnetic adhesion depends on the thickness of the material on which the foil should be applied. Magnetic foils may be cut with standard shears or, possibly, cut down to requested pieces.
This magnetic separator consists in one or two magnetic rods and stainless steel carrier into which the rods are inserted. Complete device is then inserted into the cloth sleeve filter. We simplified significanly the magnetic rod fixing in the stainless steel carrier so no screwing is necessary.
As a frequent problem associated with the food production, shoe cleaning when leaving workshop area must be taken into account. Shoes may be contaminated by ferromagnetic impurities (metal shavings, sawdust, metal dust) and there is a risk of a clean operation contamination by this waste.
Rotational magnetic separator consists of magnetic telescopic pipes located in the box structure ended by the flanges. Component with magnetic pipes is located on a shaft driven by the electromotor (400 V).
We broadened our offer with stainless steel separators for tank cars transporting various dry powder materials of food, chemical or raw material production industry. The separators find their application area especially in unloading applications when the material is transported using pressurized air within a pipeline.
Do you need to separate non-magnetic metals (e.g. aluminum or copper) from a non-metal waste? Would you like – in a non-binding way – to try how the induction separator of non-magnetic metals works just with your material? Try out our testing induction separator!
We will directly test your material for free, and document your result. This way, just with Magsy you will get a warranty that your separator will work exactly as you need!
In terms of this philosophy, we started to produce a desk-type separator, which can be - due to its unique demagnetizing system - much more easily and faster cleaned from the accumulated magnetic impurities. This is intended for separation from easily permeable mixtures with worse pouring properties and higher grain size. In their standard modification, they are fitted with ferritic magnets and if required, we can deliver them also in a modification...
This is a new, advanced magnetic separator type, designed for positioning above a conveyor belt.. Above all, it serves to separation of larger metal magnetic impurities from easily permeable compounds transported on conveyor belts. Mostly it is situated above a conveyor belt using horizontal slewing of 90°, or it is located above a staging cylinder. Collected magnetic impurities are transported away using the belt rotating around the magnet.
Benefits consist in a simple installation that does not require any modifications of the design of the conveyor belt and the possibility to approach the separator as close to the material transported as possible, thus achieving maximum utilization of magnetic lines of force.
Considering the fact they are so small and light, these color magnets are characterized by a big force. Without any problems they are capable of holding 8 pieces of paper in the A4 format on a metal background. They find their application area in offices, households, at schools. Due to their colorful design you find what you are looking for much more quickly and you will have permanent control over the noticeboard arrangement.
We do keep on striving to improve our products. As news, we are introducing you a new separator for liquid and easily permeable mixtures MF 50/1, equipped with interchangeable pipes. The magnets located in the separator are protected using stainless steel bushings. In case of damaging easily replace these covering pipes with new ones. Therefore the separator is suitable also for demanding environments (abrasive materials, etc.).
We enlarged our offer of magnetic separators for bulk mixtures. Newly we developed and are producing telescopic magnetic separators designed for the separation of metal impurities from bulk and hardly permeable mixtures transported within a pipeline.
Currently we broadened our neodymium magnet offer with another interesting category „Water resistant rubber-coated neodymium magnets“.
Due to their rubber coating, the maximum adhesion force of these magnets is slightly lower compared to non-coated neodymium magnets of a similar size.
Magnet to be placed in an injection molding machine hopper (an improved version) was developed by our team according to your requirements, stressing maximum separation efficiency and safety at work. In case of this improved version, a magnet for the injection molding machine hopper is equipped with very strong neodymium magnets. Its main benefits consist in locating of the magnets in a plastic corpus especially. The corpus covers the entire injection...
This magnetic broom serves to a collection of the metal impurities (metal shavings, nails, metal brush bristles) from the airport areas. The broom can be easily connected behind a car equipped with a towing element. When using the magnetic broom, occurrence of undesirable metal objects on the airport area van be reduced, increasing thus the overall airport safety.
This magnetic broom is, in comparison with the model MM 1200 DM, made of a stainless steel so it has a higher resistance, it is more comfortable to de-magnetize and easier method of fixation onto a forklift truck. From a viewpoint of magnetic efficiency, both brooms are identical.
To further enlarge our wide offer of articles, we have recently introduced the category „Magnetic closures“. In this category you may find the product groups „Magnetic closures and handbags“ and „Magnetic closures for jewels“.
Recently you may find also the following new stainless steel items in our offer – poles, pipes and also flat stainless steel pieces.
Read other articles
- The best, fastest and easiest magnetic photo production at your home!
- Magnetic attachment sets
- Magnetic tape
- Magnetic pockets
- School magnets
- Magnetic colors – ordinary wall changes into a magnetic noticeboard
- Magnetic pets – children will love them
- News from our e-shop: Color magnetic bands – any shelf may shine with colors
What things can we help you with?