These neodymium magnets are completely covered with a rubber layer providing the following benefits: water resistance and protection against scratching.
Material passing from the conveyor to the magnetic drum and, further, between both of the drums, the material becomes aerated that helps metal separation from adhesive materials.
ISO 9001:2008 certificate
We believe that the only products made in a quality way and using top-class materials have a chance to be successful in today´s world. By that reason, on August 10, 2006 we became holders of the ISO 9001 certificate. So we can give you a warranty that our products meet the demands of the highest quality, they are manufactured by qualified employees, on a clean workplace and according to a unified documentation.
The certificate of Strojírenský zkušební ústav in Brno, Czech Republic
> Our burden magnets are tested by the Strojírenský zkušební ústav in Brno. Each burden magnet is individually tested before it may be sold; it is supplied including a certificate where loading capacity is specified. Each burden magnet meets the requirements of the directive of the European Parliament and the Commission 2006/42/ES.
To each magnetic separator, testing protocol is attached confirming that the separator passed the test of magnetic induction and the tearing-off test, with the results specified. Magnetic induction test is carried out using a gauss-meter; tearing-off test is performed on the testing device TZM2 according to the method stipulated in the protocol.