What is it useful to cooperate with the company Magsy, s. r. o.
We are selling magnets and magnetic filters with a quality certificate
On August 10, 2006, we received ISO 9001 certificate. Therefore we can give you a warranty that our production is using only top-class materials, and our products comply with the best quality requirements, they are manufactured on a clean workplace by a qualified staff and according to a unified documentation.
Our production activities are located in the Czech Republic
We rely on a dexterity and craftsmanship of our workers – metal toolers, lathe operators, millers and welders. Our intention is the production of only quality products, capable of the comparison with others and serving to your full satisfaction.
We have our own designing and development center
We believe that only continuous development is the right way to keep our competitive strength. Therefore we can be supported by our own designing and development center consisting of experienced and motivated employees. This way we can easily prepare products meeting your expectations.
We operate branches in European countries
In order to be capable of reacting on your demands in a flexible way, we gradually established the branches in Poland, Slovakia, Bulgaria, Romania, Germany and United States. As for other European countries, we have business representatives.
We are selling magnets and other products to the whole world.
We are proud of the fact that we asserted in foreign markets. We are able to fulfill wishes of the most demanding customers. At the same time, high quality of our products must be maintained.
We have been active in the market since 2000
Company MAGSY, s. r. o. was established in November 2000. The company founder and the only owner is Jiří Němeček. The company, small and consisting of several employees in the beginning, evolved into a stable and prosperous firm with several tens of employees and a quality background. Since the end of 2011, we have been located in new premises meeting our requirements on the production efficiency and working comfort.
We are going towards each customer to maximum extent. Our products are made to measure your needs.
Branches Magsy, s. r. o.
In order to be capable of reacting on your demands in a flexible way, we gradually established the branches in Germany, Poland, Slovakia, Bulgaria, Romania and United States.
As for other European countries, we have business representatives.
763 16 Fryšták
tel.: +420 577 220 497
MAGSY SK, s.r.o.
ulica 1. mája 882/46
020 25 Púchov
tel.: +421 424 353 266
Magsy Sp. z o.o.
ul. Nakielska 35
42-600 Tarnowskie Góry
tel.: +48 32 768 34 56
Langer Kornweg 28
tel.: +49 (0) 6107 985 67 25
Magsy Bulgaria EOOD
ul. Kjustendil 21
tел.: +359 2 859 9658
S.C. MAGSY RO S.R.L.
417331 Homorog, jud. Bihor
tel.: +4 0259 372 321
Проезд Автоматики 10/3, офис 1
460048, г. Оренбург
+79 867 945 3911
12121 Wilshire Boulevard, Suite 525
Los Angeles, CA 90025
tel.: +1 619 488 1743
fax: +1 619 488 1937
ISO 9001 certificate
We believe that the only products made in a quality way and using top-class materials have a chance to be successful in today´s world. By that reason, on August 10, 2006 we became holders of the ISO 9001 certificate. So we can give you a warranty that our products meet the demands of the highest quality, they are manufactured by qualified employees, on a clean workplace and according to a unified documentation.
The certificate of Strojírenský zkušební ústav in Brno, Czech Republic
>The certificate of Strojírenský zkušební ústav in Brno, Czech Republic Our burden magnets are tested by the Strojírenský zkušební ústav in Brno. Each burden magnet is individually tested before it may be sold; it is supplied including a certificate where loading capacity is specified. Each burden magnet meets the requirements of the directive of the European Parliament and the Commission 2006/42/ES.
To each magnetic separator, testing protocol is attached confirming that the separator passed the test of magnetic induction and the tearing-off test, with the results specified. Magnetic induction test is carried out using a gauss-meter; tearing-off test is performed on the testing device TZM2 according to the method stipulated in the protocol.